Re: HOWTO: Enable DRI (3D support) on SAVAGE cards
I don't need aiglx support... just for it to simply say I have dri working.
I have checked for the dri section and is there.
I have no idea why it doesn't work. It did way back when I manually installed it in Breezy.
As for my lspci output with the graphics card...
Quote:
jason@lappy:~$ lspci | grep Savage
01:01.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 13)
jason@lappy:~$
Re: HOWTO: Enable DRI (3D support) on SAVAGE cards
encompass,
This works for my T22 with the same graphics chip:
Code:
Section "Device"
Identifier "MyVideoCard"
Driver "savage"
Option "BusType" "AGP"
Option "DmaType" "AGP"
Option "DmaMode" "None"
Option "AGPMode" "2"
Option "AGPSize" "16"
Option "SWCursor" "true"
#VideoRam 8192
EndSection
glxgears ~390, ~130 without. HTH.
Re: HOWTO: Enable DRI (3D support) on SAVAGE cards
I didn't see much of an improvement. Looks like I am stuck with what I have. Does your's say it has direct rendering? Mine doesn't.
And your settings run fine... but if I try to shutdown the X server it won't go down. But in the background I can shut it down softly.
Re: HOWTO: Enable DRI (3D support) on SAVAGE cards
Quote:
Originally Posted by
encompass
I didn't see much of an improvement. Looks like I am stuck with what I have. Does your's say it has direct rendering? Mine doesn't.
And your settings run fine... but if I try to shutdown the X server it won't go down. But in the background I can shut it down softly.
well, what does your Xorg.0.log say when trying to load the dri module?
Have you had a look at https://bugs.freedesktop.org for any open bugs related to your video chip?
Re: HOWTO: Enable DRI (3D support) on SAVAGE cards
jason@lappy:~$ grep /var/log/Xorg.0.log test
grep: test: No such file or directory
jason@lappy:~$ grep dri /var/log/Xorg.0.log
X.Org XInput driver : 0.6
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
(II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
ABI class: X.Org XInput driver, version 0.6
ABI class: X.Org XInput driver, version 0.6
ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.2 $
ABI class: XFree86 XInput driver, version 0.3
(II) SAVAGE: driver (version 2.1.1) for S3 Savage chipsets: Savage4,
(II) Synaptics touchpad driver version 0.14.6 (1406)
jason@lappy:~$ grep DRI /var/log/Xorg.0.log
(II) Loading extension XFree86-DRI
(**) SAVAGE(0): DRI is disabled by default on this chipset as it is experimental and unstable.
(EE) SAVAGE(0): DRI isn't enabled
(EE) AIGLX: Screen 0 is not DRI capable
jason@lappy:~$
wierd huh?
I will search for a bug...
Re: HOWTO: Enable DRI (3D support) on SAVAGE cards
Hey guys,
I'm having the same DRI problem here. I have a T23 thinkpad with superSavage IXC SDR video card and have tried all the common and savage drivers and i keep getting an unable to compile error. Just installed this today and did all the updates and have 2.6.17-10-386 kernel running on here. What do i need to do to get this thing running right?
Re: HOWTO: Enable DRI (3D support) on SAVAGE cards
Wow, thanks to the above guy who posted a bunch of xorg.conf options. It boosted my FPS by a good 200! I'm still having trouble installing the latest DRI drivers. Im running Edgy (Ubuntu 6.10), kernel 2.6.17-10-generic. It says I am missing some packages... What packages do I need?
Re: HOWTO: Enable DRI (3D support) on SAVAGE cards
Quote:
Originally Posted by
jakewiz247
Hey guys,
I'm having the same DRI problem here. I have a T23 thinkpad with superSavage IXC SDR video card and have tried all the common and savage drivers and i keep getting an unable to compile error. Just installed this today and did all the updates and have 2.6.17-10-386 kernel running on here. What do i need to do to get this thing running right?
I believe you do not have to compile anything in Edgy.
Why are you using the -386 kernel instead of the -generic?
Could you post the output of:
and
and
Code:
lsmod | grep savage
and if possible, could you please add a couple of attachments with your current /etc/X11/xorg.conf and /var/log/Xorg.0.log files?
Cheers
Beryl and SuperSavage cards.
Mainly my interests lay in getting Beryl working on a ThinkPad T23. 3d acceleration is a must, does anyone have beryl working with this video card?
I've also posted a separate thread if you're interested in getting Beryl working with a S3 supersavage card.
http://ubuntuforums.org/showthread.p...94#post1958294
Re: HOWTO: Enable DRI (3D support) on SAVAGE cards
Hi, I have a Supersavage/IXC16 card as well in a IBM/T23 Notebook. I'm really needing help enabling 3D support on this card. (trying to set it up to play some of the older Tomb Raider games).
this is the results of the above posted commands.
lspci
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 02)
00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 41)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 01)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 01)
01:00.0 VGA compatible controller: S3 Inc. SuperSavage IX/C SDR (rev 05)
02:00.0 CardBus bridge: Texas Instruments PCI1420
02:00.1 CardBus bridge: Texas Instruments PCI1420
02:02.0 Communication controller: Agere Systems WinModem 56k (rev 01)
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41)
03:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
lspci -n
00:00.0 0600: 8086:3575 (rev 02)
00:01.0 0604: 8086:3576 (rev 02)
00:1d.0 0c03: 8086:2482 (rev 01)
00:1d.1 0c03: 8086:2484 (rev 01)
00:1d.2 0c03: 8086:2487 (rev 01)
00:1e.0 0604: 8086:2448 (rev 41)
00:1f.0 0601: 8086:248c (rev 01)
00:1f.1 0101: 8086:248a (rev 01)
00:1f.3 0c05: 8086:2483 (rev 01)
00:1f.5 0401: 8086:2485 (rev 01)
01:00.0 0300: 5333:8c2e (rev 05)
02:00.0 0607: 104c:ac51
02:00.1 0607: 104c:ac51
02:02.0 0780: 11c1:0449 (rev 01)
02:08.0 0200: 8086:1031 (rev 41)
03:00.0 0280: 14e4:4318 (rev 02)
lsmod | grep savage
savage 35200 2
drm 74644 3 savage
And here is a copy of part of my xorg.conf. (if I need to post the whole thing, please let me know)
Section "Device"
Identifier "S3 Inc. SuperSavage IX/C SDR"
Driver "savage"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "S3 Inc. SuperSavage IX/C SDR"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Thank you very much in advance for any help ya'll can give. I installed Ubuntu over the weekend and love it so far.
James