I'd try that but I can't connect wired either.
I'd try that but I can't connect wired either.
Should I just re-install the OS?
Maybe, to get the ethernet working again, that might be the easiest way to get back to only one problem. But you'll probably still need to solve the wireless issue even after a reinstall. At least to get the ethernet going again you might be able to reload anything needed from your CD using Synaptic. If you want to try to fix the ethernet without reinstalling you'd almost want to start a new thread just about that and include all this info in it (ticket) in it, since you have a new set of symptoms.
Post the output oftoo. That way, we can find out EXACTLY what wireless card you have and what Ethernet card you have.Code:lspci
You might want to check out this page;
http://www.bauer-power.net/2009/11/g...ll-mini-9.html
See the last comment which says that it works for 10.04 also, although the initial page is talking about 9.10.
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
joe@joe-laptop:~$ sudo lshw -C network
[sudo] password for joe:
*-network
description: Network controller
product: BCM4312 802.11b/g
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=b43-pci-bridge latency=0
resources: irq:17 memory:f0200000-f0203fff
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth0
version: 02
serial: 00:21:70:d4:4e:11
size: 10MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s
resources: irq:27 ioport:2000(size=256) memory:f0610000-f0610fff(prefetchable) memory:f0600000-f060ffff(prefetchable) memory:f0620000-f063ffff(prefetchable)
*-network DISABLED
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:23:08:47:14:29
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg
After re-installing the OS it still won't connect wired.........wtf......I'm gonna go outside and scream.
Bookmarks